Friday, November 23, 2018

ZTE Minilink NR8120D CONFIGURATION

Hello friends I am going to explain basic configuration of ZTE Minilink model NR8120 configuration for you.

LAPTOP SETTING BEFORE START OF COMMISSIONING
Select – Obtain an IP address automatically
Use LAN ip address in automatically configure ip address option.


START OF COMMISSIONING
LOGIN WEB LMT
1-      Use a LAN cable (either straight through or crossover) to connect the LMT port of NR8120D and PC




Open the Internet explorer/Google Chrome and enter IP address 192.168.1.16
1-      Enter User Name and Password.
User Name: admin
Password: admin



Now Goto setup>system>parameter

              After this, below window will appear. Fill detail for all yellow color boxes and click apply.
Device IP, Subnet Mask and Default Gateway and Network Management VLAN ID, – use DCN IP address and Management VLAN provided by Microwave Engineer.
Note: Please don’t use BTS/Node B IP addresses and VLAN.In all attached snapshot, IP mentioned are just for reference purpose only

Now goto Radio Link>Basic configuration
Below window will appear. In this window, define Bandwidth, Modulation, Power and Frequency.
 a>      RF Parameter configuration.
Configure Tx Frequency, T/R spacing and Tx power. ( T/R spacing for all 15GHz links will be 420MHz


I have explained the basic configuration for detailed configuration please click on the attachment 
Thanks to all please visit my blog for other technical stuff. 

No comments:

Post a Comment