Hello friends I am going to explain basic configuration of ZTE Minilink model NR8120 configuration for you.
LAPTOP SETTING BEFORE START OF COMMISSIONING
I have explained the basic configuration for detailed configuration please click on the attachment
LAPTOP SETTING BEFORE START OF COMMISSIONING
Select – Obtain an IP address automatically
Use LAN ip address in automatically configure ip address option.
Open
the Internet explorer/Google Chrome and enter IP address 192.168.1.16
Use LAN ip address in automatically configure ip address option.
START
OF COMMISSIONING
LOGIN WEB LMT
1-
Use
a LAN cable (either straight through or crossover) to connect the LMT port of
NR8120D and PC
1-
Enter
User Name and Password.
User Name:
admin
Password:
admin
Now Goto setup>system>parameter
After this, below window will appear. Fill detail
for all yellow color boxes and click apply.
Device IP, Subnet Mask and Default Gateway and Network
Management VLAN ID, – use DCN IP address and Management VLAN provided by
Microwave Engineer.
Note: Please don’t use BTS/Node B IP addresses and VLAN.In
all attached snapshot, IP mentioned are just for reference purpose only
Now goto Radio Link>Basic configuration
Below window will appear. In this window,
define Bandwidth, Modulation, Power and Frequency.
a>
RF
Parameter configuration.
Configure Tx Frequency, T/R spacing and Tx power. ( T/R spacing for all
15GHz links will be 420MHz
I have explained the basic configuration for detailed configuration please click on the attachment
Thanks to all please visit my blog for other technical stuff.